Pre-filtration and Water Filtration - Remove Solids from Water

Manual Screen Filters

 

 

SERIES F-100 / F-300

 

 

 

 

 

 

 

 

Standard Features:

• Inlet / Outlet on axis of 90 degrees for F-100 Series and 180 degrees for F-300 Series
• Inlet and outlet through quick coupling, threaded, or flange connectors
• Electrostatically oven-cured with polyester powder at 150 micron thickness or heat galvanized at 100 micron thickness
• Double element filters available in micron sizes of 60, 80, 100, 120, 140, 155, 200, 400
• Flow rate according to the type of filter: 10 – 360m³/h
• Maximum working pressure up to 8bar

 

 

Legend: Handle Shutter Unit Cover Upper Gasket Outer Screen Element Inner Screen Element Filter Body Drain Valve Inner Gasket P.V.C Nipple Pressure Measuring Valve

 

 

 

 

SERIES F-400

  

 

 

 

 

 

 

Standard Features:

• Inlet / Outlet on axis of 180 degrees
• Inlet and outlet through quick coupling, threaded, or flange connectors
• Electrostatically oven-cured with polyester powder at 150 micron thickness or heat galvanized at 100 micron thickness
• Double element filters available in micron sizes of 60, 80, 100, 120, 140, 155, 200, 400
• Maximum working pressure up to 8bar

 

 

Model	Flow Rate [m³/h]	ØD [inch]	ØD1 [inch]	H [mm]	H1 [mm]	L [mm]	Weight [kg]
F-415M	2.7 - 10	1.5	6	360	420	360	13
F-420M	11 - 28	2	6	415	460	415	16
F-430F	12 - 39	3	6	480	530	490	19
F-440F	18 - 70	4	8	545	595	550	32
F-460F	31 - 210	6	12	1285	1635	910	118

 

 

Legend: Handle Shutter Unit Cover Diffuser Plate Screen Element Inner Gasket Filter Body Rubber Plugs Pressure Measuring Valve

Pressure Loss at 120 Micron

 

 

 

Special Options and Features:

• Construction materials: stainless steel 304L or 316L, and titanium
• Special coating: prevents deterioration from exposure to salt/sea water

 

 

Although the filters are manufactured in a top technical and technological quality, their installation, operation and maintenance are very easy. They are intended for a continuous operation and are non-demanding in terms of both rinsing water consumption and consumption of energy.

 

 

If you require removal of any mechanical impurities from water, please contact us and we will draw up, free of charge, a proposal for the most suitable solution for you, on the basis of a raw water analysis, required filtration capacity [m³/hr] and required quality of output water.

 

 

High Quality Water No Matter Where It Comes From